Requirements and Condtitions for Standard Resolution 3D CT Scan:

• Your part must be smaller than 30 cm × 25 cm × 25 cm.
• Your part must be larger than 4 cm.
•Your part should be made from a relatively lightweight material, e.g.: plastic, wood, carbon fiber, silicone, gypsum, concrete, glass, or (aluminum which is thinner than 5 mm).
•Your part should not be made from a dense material, e.g: (aluminum which is thicker than 5 mm) steel, brass, tin or lead because this will lead to 3d scanning artifacts.
• This 3D scanner does not record color.
• Internal structures of your part are captured in the 3D scan.